PID Command & Ctrl SOFTWARE PARA GESTIÓN DE PANTALLAS

First, make sure the IP address shown on the PID Software and Monitors’ IP address in the same domain.
e.g. PC IP Address: 192.168.1.XXX, Monitor IP Address 192.168.1.XXX

Click IP Scan on the PID Software to Search, PID Software Can Get All Monitors list.
e.g. Mobile shows Local IP: 192.168.0.146
Monitor IP Address Show: 192.168.0.151

Because an aggressive power saving mode will turn off the Ethernet port of the displays. If you want to be able to have access to the Ethernet port while the displays are off, you need to Set Monitor “Power Saving” Function as follows:

QM/NSD: OSD Advanced Option → Power Save → Mode 4 or Mode 3.
PD/PN: Enable Eco mode by pressing ↑ + ↓ + ← + → + OK
OSD General Setting → Eco mode → Normal

PID Software at RS232 mode Auto Search function only support a Model
Use RS232 to control Monitor, Every Monitor need Set Different “Monitor ID”.

QM/NSD/IFP Android-based models do not support IR Remote function.

Click on the “UniWall” tab of the Windows version of the PID software to check the supported models. On the Android version the application will automatically scan only the supported models.

Yes, after IP Scan, you can select one display to control.

For PD/PN/PM models use the remote controller and press “ Home+1998”.
For QM/NSD models use the remote controller, press and hold the “Info” Button for 6 Seconds.

Yes, only Windows version supports RS-232 command

Yes, both Windows and Android versions support Ethernet command

Yes, both Windows and Android versions support video wall setup